Switching out body of 91 EZGO Marathon

[jblank]

Hi guys,

I see online that there are numerous "custom bodies" (front and rear cowls etc...) for EZGO golf carts, but nearly all are 1994 and up. I believe I saw as I perused old posts on the forum that the Marathon is slightly smaller in several dimensions, but feel sure that it is possible to use a bit of "creative ingenuity" to adapt these newer fiberglass bodies. Does anyone have any experience with this? If it is simply not possible, I obviously want to know that.

If it is possible, to what degree of "adaption" is required (i.e. does it require arch welding/cutting, or simply going to Lowe's and picking up a few bracket extensions...or something in the vast chasm in between)?

Any and all feedback would be appreciated.

[pachanga90]

Its' not real complicated to make the newer bodies fit,as long as you have some basic fabrication skills.My Avatar pic is a 85' Marathon with a 2000 TXT-Body.Remove the Cowl/Hood panel,Dash,and Tray.Then fit the new body,you will see where you need to trim/modify to fit.Then build some new supports.Hope this helps.