01-07-2014, 02:46 PM | #1 |
Gone Wild
Join Date: Dec 2010
Posts: 635
|
Accelerator Cable
My 97 gas cc car cannot get slack out of cable due to not having any adj in pedal box it seems like cable is too long but i installed a new one same thing its like rear end or something has changed any suggestions anyone
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2014, 06:42 AM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Accelerator Cable
No adjustment at the Electrical Components Box (ECB)?
Or you already have it adjusted all of the way out? There should be a little bit of slack on the cable as it wraps around the cam: 084.JPG And no threaded adjustment at the bracket towards the governor spring: 096.JPG IF... your threaded end at the ECB is all of the way out, You might be able to tweak the the bracket at the gov spring side to pull out some of the slack! Not sure if that will work or help, but it's worth a shot! |
|
|
Similar Threads | ||||
Thread | Forum | |||
79 ezgo accelerator cable | Gas EZGO | |||
G22 accelerator cable install | Gas Yamaha | |||
G16 Accelerator Cable Install | Gas Yamaha | |||
Accelerator Cable | Gas EZGO | |||
1991 Par Car Accelerator cable | Gas Columbia ParCar |