|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-04-2014, 09:37 PM | #1 |
Not Yet Wild
Join Date: Aug 2010
Posts: 8
|
G2 stater pulley
I am trying to rebuild the motor in my cart and i cant get the starter pulley off the crank shaft .i have heated it and put a puller on it and still wont come off
So what is the trick to getting it off . also If I want to put a lawn mower motor in it how would i put the cultch on the lawn mower motor for it is not spline shaft. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-04-2014, 10:39 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 stater pulley
What you are attempting in this pic will never work. Look up "yamaha clutch puller bolt" to see what you will need.
|
07-05-2014, 08:55 AM | #3 |
Not Yet Wild
Join Date: Aug 2010
Posts: 8
|
Re: G2 stater pulley
what size metric threads is it for the puller ,for in my wrong attempt to getting it off I messed you the threads for the puller bolt
|
07-05-2014, 12:26 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 stater pulley
Dang, i have the tap at work, not here. Sorry, couldnt say...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Pulley OD for starter/gen RPM | Clone Engine Swaps | |||
pulley | Gas EZGO | |||
Wanted: G1 parts magneto, stater, cdi | Golf Carts and Parts | |||
pulley removal | Gas EZGO | |||
Ezgo stater/generator and misc. parts | Golf Carts and Parts |