10-07-2016, 06:28 AM | #1 |
Not Yet Wild
Join Date: Sep 2016
Location: Virginia Beach
Posts: 34
|
Trouble shooting
all but one solenoid have 36 volts one close to driver only getting 6v on large post? All new solenoids and new micro switches. small post get 36v when pressing gas pedal but large post to motor only receiving 6.???
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-07-2016, 08:12 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,360
|
Re: Trouble shooting
Were do the big cables on solenoid #1 (closest to the driver's side of the cart) go to?
|
10-07-2016, 08:35 AM | #3 |
Not Yet Wild
Join Date: Sep 2016
Location: Virginia Beach
Posts: 34
|
Re: Trouble shooting
Big cable is going to A2 terminal on the motor.
|
10-07-2016, 09:17 AM | #4 |
Gone Wild
Join Date: Feb 2015
Location: Quad cities
Posts: 334
|
Re: Trouble shooting
is the cart in forward or reverse when checking voltage
|
10-07-2016, 09:27 AM | #5 |
Not Yet Wild
Join Date: Sep 2016
Location: Virginia Beach
Posts: 34
|
Re: Trouble shooting
in forward I get 6v in reverse I am getting 18.
|
10-07-2016, 09:30 AM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Trouble shooting
It would help if You post a picture of the battery wiring and the FNR, it appears You have something mis-wired.
|
10-07-2016, 09:49 AM | #7 |
Not Yet Wild
Join Date: Sep 2016
Location: Virginia Beach
Posts: 34
|
Re: Trouble shooting
Here is a few.
|
10-07-2016, 10:00 AM | #8 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Trouble shooting
With Battery #1 being the pack positive (passenger side with red tape), You show the half-speed reverse cable laying on top of battery #4.
The cable going to the motor should be connected to battery #6 (pack negative with blue tape). It looks like You have the motor cable on battery #5. Edit: The Resistor coils are not correct either. The coil with the most turns and thinner gauge should be on the Master solenoid on the driver side. Last edited by Sergio; 10-07-2016 at 10:11 AM.. Reason: More Info. |
10-07-2016, 10:15 AM | #9 |
Not Yet Wild
Join Date: Sep 2016
Location: Virginia Beach
Posts: 34
|
Re: Trouble shooting
gotcha I switched that. Should solenoid 5 large post ever receive 36v. Now it reads 0 and when I depress the pedal the small terminal with green wire receives 36v and 0 when I let off. cart does not want to go for some reason.
|
10-07-2016, 10:23 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,360
|
Re: Trouble shooting
D0 you have a diagram for the way the cart was originally? please print this out for comparison.
Curiously you have 2 cables landed on the (-) battery 6 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Help with trouble shooting. | Electric Club Car | |||
trouble shooting help G16 | Electric Yamaha | |||
'91 CC Trouble shooting | Electric Club Car | |||
Trouble shooting | Electric EZGO | |||
ez go trouble shooting | Electric EZGO |