|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-15-2018, 09:27 PM
|
#1 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
G22 and G29 motor difference
I put a G29 motor on a G22E and the spline fits very loosely around the input shaft. What’s the difference between these motors? The motor I got is a Hitachi DM430-06A, and I noticed that the original motor was DM430-06.
How can I find the right motor? I’m looking for a stock motor. Triangular speed sensor plug. Thanks, Luke Club Car DS driver’s club #59 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-15-2018, 09:33 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G22 and G29 motor difference
I know of no difference besides tach sensor plug. Ive worked at a Yamaha dealer since '07.
|
|
|
|
|
06-15-2018, 10:04 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G22 and G29 motor difference
The center spline fits very loosely on my rear axle for the G22. My old armature for the busted motor has a tighter fit. When driving the cart, I can hear knocking from the motor rotating before it “hits” the input shaft.
Club Car DS driver’s club #59 |
|
|
|
|
06-15-2018, 10:05 PM
|
#4 | |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G22 and G29 motor difference
Quote:
The sensor plug seems to be the same from the G22 to the G29 “Drive” Club Car DS driver’s club #59 |
|
|
|
|
|
06-16-2018, 09:04 AM
|
#5 | |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G22 and G29 motor difference
Quote:
So CG, you can confirm that you’ve seen Drive motors work on a G22? And I shouldn’t worry about the loose fit? Club Car DS driver’s club #59 |
|
|
|
|
|
06-16-2018, 10:41 AM
|
#6 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G22 and G29 motor difference
Well, if YDRE input shaft splines were bigger, ScottyB wouldn't be able to sell commonly available motors to fit YDRE. Yes, I would be more concerned with your input shaft. Doesn't G22 have a "grey triangle plug", And Ydre have a slightly different "white plug".
|
|
|
|
|
06-16-2018, 11:11 AM
|
#7 | |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G22 and G29 motor difference
Quote:
 |
|
|
|
|
|
06-16-2018, 01:02 PM
|
#8 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G22 and G29 motor difference
Pictures of G22 and harness speed sensor connector.
Club Car DS driver’s club #59 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| what is the difference? | Gas EZGO | |||
| what is the difference? | Electric Club Car | |||
| How much of a difference? | Electric Yamaha | |||
| how to tell difference in G2 and G9 | Gas Yamaha | |||
| 96 and 97 difference | Gas Club Car | |||
Linear Mode
