|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-26-2009, 06:42 PM | #1 |
Not Yet Wild
Join Date: Dec 2008
Posts: 22
|
Please Help!!
Please help.... DO I continue to tighten the puller bolt in order for the old clutch to come off or is there another truck???/
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-27-2009, 07:09 AM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Please Help!!
WD40, rubber mallet and piece of a 2x4.
|
|
|
08-27-2009, 07:49 AM | #3 |
Gone Wild
Join Date: Jun 2009
Location: Central Nebrasak
Posts: 419
|
Re: Please Help!!
|
08-27-2009, 07:51 AM | #4 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Please Help!!
Best home made puller out there.
|
|
|
08-27-2009, 07:52 AM | #5 |
Gone Wild
Join Date: Jun 2009
Location: Central Nebrasak
Posts: 419
|
Re: Please Help!!
|
08-27-2009, 07:57 AM | #6 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Please Help!!
I've only had to use a puller two times and I still had to get a piece of a 2x4, place it between the sheaves and smack it with a rubber mallet several times before it would pop off. Usually soaking the shaft down with WD40 over night and a few light smacks with a rubber mallet and it will pop off. Worst one I had was on an old G2. Had to use an air hammer but I got it off. It wasn't pretty!
|
|
|
08-27-2009, 07:41 PM | #7 |
Not Yet Wild
Join Date: Jul 2009
Location: ct
Posts: 21
|
Re: Please Help!!
fill the hole with grease
|
08-27-2009, 08:15 PM | #8 |
Getting Wild
Join Date: Aug 2009
Posts: 89
|
Re: Please Help!!
impressive 6 post same question
|