|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-02-2017, 06:04 PM | #1 |
Getting Wild
Join Date: Feb 2014
Posts: 93
|
Changing cables and need confirmation...
Changing cables and batteries. Want to make sure I have positive and negative leads correct. The pictured is the main positive lead that connects to the solenoid attached to the controller, correct? See picture.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-02-2017, 06:05 PM | #2 |
Getting Wild
Join Date: Feb 2014
Posts: 93
|
Re: Changing cables and need confirmation...
This post attached to the top of the controller is the negative, correct?
Thanks for answering my stupid questions. |
06-02-2017, 06:31 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Changing cables and need confirmation...
Both look correct to me. But that puny little stock solenoid is still a ticking time bomb. Well, that'll be on the list when it's controller time.
|
06-02-2017, 07:21 PM | #4 |
Getting Wild
Join Date: Feb 2014
Posts: 93
|
Re: Changing cables and need confirmation...
Good to know. Thanks. I'm hoping it gets going again without anything broke. Been sitting for three years.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
noob..battery confirmation..anyone? | Electric Club Car | |||
90 ezgo volts confirmation | Electric EZGO | |||
Need confirmation that this is a G1 | Gas Yamaha | |||
Changing from 6 ga to 4 ga battery cables | Electric Club Car | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO |