|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-13-2008, 01:23 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Location: kentucky
Posts: 15
|
g1 crank seal replacement
What tools will I need to change the crank seals on my g1? thanks in advance for any help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2008, 03:12 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: g1 crank seal replacement
You will need a puller to remove the clutch and puller for the flywheel. Other than that just wrenches.
See this thread>> http://www.buggiesgonewild.com/gas-y...aft-seals.html |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1983 crank case oil | Gas EZGO | |||
no crank no start | Gas Club Car | |||
1987 marathon crank case question | Gas EZGO | |||
g1 crank seals | Gas Yamaha | |||
1997 TXT Restoration CRANK NEEDED !!! | Gas EZGO |