|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-06-2015, 05:55 PM
|
#1 |
|
Not Yet Wild
 Join Date: May 2011
Posts: 17
|
Swaping a Rear End or finding smaller hubs?
I have a 1984 Western 300 Series cart. I have been adapting Wheelsca disc brakes to it. The rear end is a spicer and it has 3/4 inch splines at the wheels. The hubs I have from wheelsca are 1 inch. Does anyone have any experience with this? I am trying to figure out if adapting a new rear end with 1 inch splines is possible or if hubs are available elsewhere with 3/4 inch splines? Anybody want to take a stab at this? Thanks Doug
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-06-2015, 06:53 PM
|
#2 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Swaping a Rear End or finding smaller hubs?
3/4 is standard electric.... you probably have gas hubs there - Have u asked for some 3/4" hubs?
|
|
|
|
|
04-06-2015, 07:13 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2011
Posts: 17
|
Re: Swaping a Rear End or finding smaller hubs?
Hi Scotty. I told Rick over at Wheelsca what my project was. He sent the kit over with the 1" hubs. I didnt think to mention the hub spline size, because he said he knew what I had. I will give him a call tomorrow. Do you know if he has hubs for 3/4 inch splines as well?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tire size ? ....smaller fronts that rear? | Lifted Golf Carts | |||
| Replaced Hubs on EZ Go TXT, is it the rear end? | Electric EZGO | |||
| EZGO 5 lug rear hubs | Gas EZGO | |||
| swaping a yamaha rear axel with a clubcar | On Road Golf Carts! | |||
| Taking off rear hubs | Design Center | |||
Linear Mode
