|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-08-2015, 01:01 PM | #1 |
Not Yet Wild
Join Date: Oct 2011
Location: OKLAHOMA
Posts: 11
|
Pds 2 controller
Has anyone out there converted a sepex pds2 curtis 5604-1206 TO a altrac or other controller
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-08-2015, 03:39 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Pds 2 controller
Hi Monty, I'm pretty sure it can be done. Can you you post a diagram and/or the pin layout for the PDS 2 cart that you said you had? I foresee needing a controller, solenoid, motor, and harness. But question is how many harnesses? There are 3 in this cart. If we can get the brain trust here on BGW to put their heads together I'm sure we can do it.
|
09-08-2015, 04:05 PM | #3 |
Not Yet Wild
Join Date: Oct 2011
Location: OKLAHOMA
Posts: 11
|
Re: Pds 2 controller
Am on road today will try to post diagrams when i get in this eve.
|
09-08-2015, 06:11 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Pds 2 controller
Here's a screen grab of it. Looks quite do-able, maybe already done. BTW, the "personality select" stuff was only vaguely described in class (im betting for street/golf mode, ect, future plans).
|
09-08-2015, 08:02 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Pds 2 controller
That is TXT48. Is that the same as this beast below
|
09-08-2015, 09:51 PM | #6 |
Not Yet Wild
Join Date: Oct 2011
Location: OKLAHOMA
Posts: 11
|
Re: Pds 2 controller
here is what i have on controller wiring
|
09-08-2015, 10:36 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Pds 2 controller
Okay that what I was expecting - a 24 pin pin connector.
So - do you have a 4 pin connector between the Pedal Box ITS unit and the main harness? Should have wht,blk,red,grn wires all shown coming from the pedal box in the upper right corner of your diagram? What is the configuration of this plug if you have it? Is there a plug for the Run tow switch or is it wired right into the 24 pin plug? |
09-08-2015, 10:55 PM | #8 |
Not Yet Wild
Join Date: Oct 2011
Location: OKLAHOMA
Posts: 11
|
Re: Pds 2 controller
pedal box connector is 4 pin square 2 and 2
tow run is 4 pin flat |
09-12-2015, 09:39 AM | #9 |
Not Yet Wild
Join Date: Oct 2011
Location: OKLAHOMA
Posts: 11
|
Re: Pds 2 controller
Would pics of connectors help?
|
09-12-2015, 10:55 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Pds 2 controller
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |