Seat Covers

[RockChalker]

I would like to upgrade the style of my seats. They are white vinyl. I like the two color look. Any suggestions for things to consider?

[Chisoxguy13]

Originally Posted by RockChalker

I would like to upgrade the style of my seats. They are white vinyl. I like the two color look. Any suggestions for things to consider?

We got marine vinyl from a fabric store and made our own. Was very easy. The center strip is 13" and .5" on each side was the sew line so the center stripe is 12". Use old covers as a base for the outline and then stretch and staple. Used a blow dryer around the edges before I stapled them. Center bowed in just a little where the backrest comes down so would taper the top about 1/4" out with the center color if I was to do it again. Can't really tell unless you look at it closely directly in front of it though. 1 year later they still look good.

[rose88]

Check These out!!



They are on sale this week ONLY!!! 199.99 for the complete front seats, all you do is bolt your arm rests and hinges on.

[RockChalker]

Rose88 those are sweet. I like the DIY idea. Thanks Chisoxguy13.

[rose88]

Covers only are just 129.99

[jeffrop]

Dave at XT-Innovations.com can make you some sweet custom seats and/or covers for your existing.

I just had some done and they are kick-*** to say the least

Here's a link: http://www.xt-innovations.com/cartseatphotos.html

[cheapjeep2]

Try Mike at Easydoesitcustoms.com They have an awesome application to let you try different combos http://easydoesitcustoms.com/ezview/

I got a set for the front and rear cheaper than any place else, and they are working to be a sponsor here.

Here is a picture of my seats.