|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-11-2011, 04:49 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Where do these wires go?
Ive got a 93 ezgo....whenever you press the pedal to the floor it stalls. I noticed there was a little black wire that looked cut dangling today. The highlighted wires in my attachment are what im trying to figure out. These two wires are small little wires and this diagram is showing them going to the battery.... Is that correct? Does anyone have an actual picture of these wires so I can, becuz we just bought it and I dont knnow if the previous owner wired it wrong or something. Thanks.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-11-2011, 04:54 PM
|
#2 |
|
Gone Wild
 Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Where do these wires go?
There is no picture. We can't see what wires you are speaking of.
 |
|
|
|
|
09-11-2011, 04:55 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: Where do these wires go?
Well my picture didn't upload but if you look at the wiring diagram of the 89-94 ezgo with the curtis 1204 controller its the little thing that looks like a wheel under the A2 icon.
Heres my picture that didnt upload. http://imageshack.us/photo/my-images/4/dfdy.png/ |
|
|
|
|
09-11-2011, 04:56 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: Where do these wires go?
Also in reverse I am getting 0 to 3.6k ohm from the pot, in forward if i press the throttle all the way I get 25 k ohms. The problem is if i press the pedal all the way down it wont move, but at half it goes but it is slow. I have read that the ohms are to high on forward but don't know how to adjust it. If I adjust the linkage for that will the ohms mess up in reverse? The red wire is going to the double micro switch and the black wire is just loose/broken. I have been looking through the forums and could this be a buzzer of some kind? If so does it need to be hooked up?
|
|
|
|
|
09-11-2011, 09:59 PM
|
#5 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Where do these wires go?
 |
|
|
|
|
09-11-2011, 11:10 PM
|
#6 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Where do these wires go?
Welcome to BGW
Not sure what Colt means in his post, but that is your reverse buzzer and I don't know why they ran those wires that way, |
|
|
|
|
09-12-2011, 10:17 AM
|
#7 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Where do these wires go?
That's the picture he was trying to post up but couldn't figure it out.
 |
|
|
|
|
09-12-2011, 10:20 AM
|
#8 | |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Where do these wires go?
Quote:
 |
|
|
|
|
|
09-12-2011, 04:58 PM
|
#9 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: Where do these wires go?
What about the other issues? If anyone could help with that.
|
|
|
|
|
09-12-2011, 05:03 PM
|
#10 |
|
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,284
|
Re: Where do these wires go?
Adjusting the pot for correct output will make the cart operate correctly in BOTH directions. Direction is controlled by POLARITY on a DC motor, and polarity is controlled within the F/R assembly on your series cart.
And, Welcome to BGW! |
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New Wires | Electric Club Car | |||
| F-1,2 wires | Electric Club Car | |||
| 1/0 wires | Electric EZGO | |||
| Hot Wires | Electric EZGO | |||
| where do all these wires go | Electric EZGO | |||
Linear Mode
