|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-24-2012, 10:31 PM | #11 |
Gone Wild
Join Date: Mar 2011
Posts: 245
|
Re: Shuttle 6 upgrade but still not fast enough
Way to hijack the thread :)
If your buddy is a welder, why not just fabricate a custom block to fit it? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-25-2012, 03:57 PM | #12 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: Shuttle 6 upgrade but still not fast enough
Sorry razor1.. I will ask my dealer buddy next time I see him if he has done this or if it can be done.. Have you thought about replacing the motor ? PlumQuick could build you one to whatever specs you wanted.
|
04-30-2013, 09:25 PM | #13 |
Not Yet Wild
Join Date: Apr 2013
Posts: 7
|
Re: Shuttle 6 upgrade but still not fast enough
I ran into the same situation as you. The factory shuttle carts have hydraulic brakes on the rear which are mounted to the top of the axle right where leaf springs would normally be on a lifted cart. I had to fabricate a 3 link system with a panard bar to keep the axle centered and to prevent wrapping. We supported my cart using coil over shocks...this is not easy but is doable, mine works awesome thanks to a close buddy that can fab anything....hope this helps
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'02 EZGO PDS Fast,Slow,Stop, Fast | Electric EZGO | |||
Ez-go Shuttle Wheels To Ez-go PDS | Design Center | |||
EZ-GO 8 seater shuttle | Electric EZGO | |||
my new shuttle | Electric EZGO | |||
Ez Go Shuttle | Electric EZGO |