|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-14-2012, 01:27 PM
|
#21 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Update: pin 1 on controller reads 38.3 volts, so my question is, is me controller bad?
Sent from powders back pocket |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-14-2012, 04:32 PM
|
#22 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
But my controller doesn't light up, so I know it's getting power in, but no light tells there's no power coming out...is there anyway to diagnose the controller better???
Sent from powders back pocket |
|
|
|
|
07-14-2012, 10:46 PM
|
#23 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Any ideas on how to test the controller
Sent from powders back pocket |
|
|
|
|
07-15-2012, 12:56 AM
|
#24 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1997 Ez-Go TXT Series
Lemme see if I can catch up here? Put test lead + on pin #1 and - test lead on B-. You should have 38v when the solenoid clicks? yes or no
|
|
|
|
|
07-15-2012, 09:46 AM
|
#25 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Yes
Sent from powders back pocket |
|
|
|
|
07-15-2012, 08:53 PM
|
#26 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Up ttt
Sent from powders back pocket |
|
|
|
|
07-15-2012, 10:15 PM
|
#27 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1997 Ez-Go TXT Series
Put the test leads on B- and M- and watch the meter as you press the peddle. When the solenoid clicks you should have 36v & that voltage should go to 0 as you press the gas down.... yes?
|
|
|
|
|
07-16-2012, 08:37 AM
|
#28 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
I just checked the b- and m- and read 36v to 0v
Sent from powders back pocket |
|
|
|
|
07-16-2012, 09:04 AM
|
#29 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1997 Ez-Go TXT Series
If 36v when the solenoid clicks and then down to 0 as the peddle is depressed your controller & solenoid are working ... look elsewhere for your problem, F&R?
|
|
|
|
|
07-16-2012, 09:34 AM
|
#30 |
|
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
ScottyB, I still am wondering if the controller is malfunctioning, because the cart was working fine when I went out to test m- and b- this morning! If it stops running I'll test it then again to see! How can I rule out the FnR switch
Sent from powders back pocket |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
| 1997 Series Stock TXT with 23" Tires | Electric EZGO | |||
| 1997 EZGO gas 1997 not firing | Gas EZGO | |||
| 1997 DCS value | Electric EZGO | |||
| 6x6V series or 2x3x12V Series/parallel | Electric golf carts | |||
Linear Mode
