|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-16-2012, 02:00 PM | #11 | |
Not Yet Wild
Join Date: Jul 2011
Posts: 7
|
Re: Melted New Charger Handle on 36V Marathon
Quote:
I came up with 8.3lbs x50= 415lbs Although its rarely filled more then 3/4 full so about 300lbs is more accurate. The "bed" is attached through 4 threaded rods bolted through the frame, and the barrel sits in a wooden "holder" so it cant roll forward or back and then bungee'd down so it can't bounce. So its not that "live" of a weight. The whole reason the cart exists is to move the water around.(Rented land) Some of the feilds are 100/200 yards away from any sort of water line, and my idea's of a network of rubber hose's keeps getting shot down. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2012, 02:07 PM | #12 | |
Not Yet Wild
Join Date: Jul 2011
Posts: 7
|
Re: Melted New Charger Handle on 36V Marathon
Quote:
I wish they'd drive off and never come back, they leave "poo pellets" everywhere! And they chew on everything, including the black wrap i was using on the cart. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
88 Marathon Charger | Electric EZGO | |||
EZ GO Charger Not charging handle getting hot | Electric EZGO | |||
Ezgo marathon charger | Electric EZGO | |||
converting an old style dial charger to a smart charger for Marathon | Electric EZGO |