lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-25-2013, 09:30 AM   #1
jaylebanon
Not Yet Wild
 
Join Date: Mar 2013
Posts: 7
Default 48 volt CC no power to small terminals on solenoid

I'm not able to get any power to the small terminals on solenoid with pedal engaged. i recently upgraded to a 7119 motor/controler/solenoid/f&r/cables and after the install i'm stuck at this point. does the main negative wire (coming from battery) have to pass through the obc? the head on the new 4ga wire was to big so i ran it around instead of through. i know it sounds crazy but i've tried everything...
jaylebanon is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-25-2013, 09:53 AM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 48 volt CC no power to small terminals on solenoid

Running the big cable around the OBC should not effect the solenoid activation so long as the OBC is still operational. The OBC does supply the negative side of the activation circuit.
Check the solenoid when you press the gas, are you missing the + or the - side on the small terminals?
Attached Images
File Type: jpg Resistor & Diode instruction01.jpg (230.6 KB, 0 views)
scottyb is offline   Reply With Quote
Old 03-25-2013, 10:08 AM   #3
Stevegrmich
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
Default Re: 48 volt CC no power to small terminals on solenoid

. . . and bypassing the OBC eliminates the computer's ability to monitor your battery usage . . .
Stevegrmich is offline   Reply With Quote
Old 03-25-2013, 10:31 AM   #4
jaylebanon
Not Yet Wild
 
Join Date: Mar 2013
Posts: 7
Default Re: 48 volt CC no power to small terminals on solenoid

i'm missing both... I dont get any sort of reading when the pedal is pushed. all i have is a red wire and a yellow wire. i noticed your drawing has both of those together being the positive with a blue and black being the negative. I don't have the blue and black wire - just a red and yellow? am i missing something?

the hd f&r switch is brand new so i doubt it's the microswitches

in reference to the obc - it is controlling the charger by kicking it on with the charger plugged into the wall and with the charger not plugged into the wall.

and thanks for your time and help on this. it is really appreciated. i have spent hours and hours trying different things and reading this forum.
jaylebanon is offline   Reply With Quote
Old 03-25-2013, 10:43 AM   #5
jaylebanon
Not Yet Wild
 
Join Date: Mar 2013
Posts: 7
Default Re: 48 volt CC no power to small terminals on solenoid

2001 48v CC DS Series fyi
jaylebanon is offline   Reply With Quote
Old 03-25-2013, 11:03 AM   #6
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 48 volt CC no power to small terminals on solenoid

The picture is instructional - apply the theory not the colors.
scottyb is offline   Reply With Quote
Old 03-25-2013, 01:00 PM   #7
Stevegrmich
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
Default Re: 48 volt CC no power to small terminals on solenoid

Quote:
Originally Posted by jaylebanon View Post



in reference to the obc - it is controlling the charger by kicking it on with the charger plugged into the wall and with the charger not plugged into the wall.
. . . the OBC controls the charge cycle and when the charger is left attached to cart and plugged into wall for extended periods of time, the OBC will call for a charge cycle about every 2 weeks if cart has not been used . . . ScottyB sells a modification for your situation . . .

Stevegrmich is offline   Reply With Quote
Old 03-25-2013, 01:04 PM   #8
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 48 volt CC no power to small terminals on solenoid

Shhhh ....... that's a secret.
scottyb is offline   Reply With Quote
Old 03-26-2013, 09:05 AM   #9
jaylebanon
Not Yet Wild
 
Join Date: Mar 2013
Posts: 7
Default Re: 48 volt CC no power to small terminals on solenoid

Ok so i had the two white wires (one has a small black strip on it while the other is solid) backwards on the 1st and 3rd microswitch. once corrected power was given to the small terminals on the solenoid when the pedal was engaged and the wheels turned.

Once the snow clears here in ky ill give everyone a performance update on my 7119 amd motor/controller/hd f&r/solenoid/4ga cable upgrade...1200 package so i hope to see a big difference
jaylebanon is offline   Reply With Quote
Old 03-26-2013, 09:13 AM   #10
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 48 volt CC no power to small terminals on solenoid

Who makes that control?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Broke off small bolt on new solenoid Electric EZGO
Terminals too small for solinoid post Electric EZGO
club car 48 volt no power to solenoid Electric Club Car
49 volt club car no power to solenoid Electric Club Car
2000 PDS Resistor Across Solenoid Terminals Electric EZGO


All times are GMT -5. The time now is 02:41 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.