|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-01-2013, 10:15 AM | #1 |
Not Yet Wild
Join Date: May 2013
Location: indiana
Posts: 1
|
upgrade controller and selenoid
I have a 2007 EZ GO electric golf cart that I am trying to upgrade the controller and the selenoid. I rewired directly from the other controller but now I am having trouble with the selenoid wiring. I am installing a Alltrax controller 500 and a curtis selenoid. Not sure if I have the wires correct along with hooking up the 4 wires that pluged into the top of the old controler. I am at a loss right now. Can someone give me any ideas Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-01-2013, 01:09 PM | #2 |
Guest
Posts: n/a
|
Re: upgrade controller and selenoid
1st welcome to BGW !!!
2nd 36v or 48v ?? 3rd type of cart ?? 4th got pics ??? |
05-01-2013, 02:36 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: upgrade controller and selenoid
Doesn't mater what make or configuration of golf cart solenoid you may have, this quick installation sheet applies. Don't get hung up on the wire colors, check their polarity to ID + and minus on the small wires if in doubt
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G9 Starter selenoid | Gas golf carts | |||
Selenoid and Resistor hot and not charging | Electric Club Car | |||
selenoid clicks, no movement | Electric EZGO | |||
keeps burning up first selenoid | Electric Club Car | |||
selenoid troble | Electric Club Car |