|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-03-2013, 05:13 PM | #21 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Wheels not spinning
My hub was splineless as well, but the axle seemed good. To save the axle, I bought some very small files and cleaned up the splines on the axle and bought a new hub. All is good now. Not sure if this will work for you. IMHO, I think that they make the hub out of a softer material than the axle, so it will fail before the hard-to-replace axle does.......
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-03-2013, 06:00 PM | #22 |
Gone Wild
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
|
Re: Wheels not spinning
here are the bad parts- can anyone tell me what to order
I think I figured out why it wouldn't move can you help me identify the parts I need? It looks like the brakes locked up and the motor continued to spin and it took the splines off of the axle shaft it self and the the interior of the hub- 1 can anyone identify the hub I need to order? since this is a ezgo/bad boy? 2 can anyone identify the axle shaft I need to order? 3 I think we should put brakes on both sides of the cart, not just the drivers side- do you agree or disagree? \ thanks guys- I still think its funny that he thinks I know a lot about these carts |
11-03-2013, 06:26 PM | #23 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Wheels not spinning
IMHO, I think your axle looks good from what I can tell with those photos. Maybe the thing to do is to order the hubs ($43 from golfcartking.com for a TXT) and see if you can fit them. If so, just go with it. Just my opinion.......
|
11-03-2013, 07:26 PM | #24 |
Gone Wild
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
|
Re: Wheels not spinning
I am missing about 1 1/2 inches of spline
the other side has a very distinct shoulder I am thinking one drum one axle both sides break shoes |
11-03-2013, 08:15 PM | #25 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Wheels not spinning
OIC. In that case, I would replace the axle shaft. Mine did not have any of the splines on the axle shat missing. Only the slplines on the hub were worn smooth.....
|
11-05-2013, 09:23 AM | #26 |
Gone Wild
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
|
Re: Wheels not spinning
Help
A place in my area-st. Louis- looked at this axle and said its not that bad? would you or wouldn't you replace the axle? I am going to replace both sets of brakes, the drivers side drum and hub I am wondering about the axle thanks Guys My wife says we are allowed one buggy in the back yard not two- I got to fix this this weekend |
11-05-2013, 09:51 AM | #27 |
Gone Wild
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
|
Re: Wheels not spinning
sorry fopr double p[ost
Last edited by csport; 11-05-2013 at 09:57 AM.. Reason: hiccup |
11-05-2013, 10:28 AM | #28 | |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,995
|
Re: Wheels not spinning
Quote:
|
|
11-05-2013, 10:38 AM | #29 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Wheels not spinning
Its hard to tell from the picture if the axle is actually worn badly or not. If the part just outboard of the end of the slines are SUPPOSED to have splines, then this axle shaft is defenetley bad and needs replacing. BUT, if the end of the splines are supposed to be there, then this axle looks OK to me.
You will also have to examine your brake hubs. If the splines inside of the hole that this axle shaft fits into are worn (examine it after removing the brake drum from the axle), and I am betting that they are(its a weak link in the ezgo carts) then it will definetley need replacing. You will have to repeat the procedure for the other side. Its not as hard as it seems, tho. Hope this helps..... |
11-05-2013, 04:28 PM | #30 |
Getting Wild
Join Date: Aug 2012
Location: Peachtree City, GA
Posts: 95
|
On my left wheel I took off the hub to inspect the splines and they look perfectly fine to me and so does the axle but that wheel srill does not spin. Could there be a problem at the other end of the axle?
Sent from my SPH-D710VMUB using Tapatalk 2 |
|
|
Similar Threads | ||||
Thread | Forum | |||
01 PDS Motor Spinning but NO Go | Electric EZGO | |||
belt not spinning | Gas Columbia ParCar | |||
Spinning Hubs | Extreme DC! | |||
Spinning Motor S1 stud | Electric Club Car | |||
how to get both wheels spinning | Gas EZGO |