48V Club Car New Motor not moving

FF Titus · 07-25-2014, 01:28 PM

2002 ds 48v

FF Titus · 07-25-2014, 01:29 PM

On the handheld, the pedal when floored only says 85% if that means anything.

FF Titus · 07-25-2014, 01:38 PM

I don't believe it to be LBV because it's not coming up at LBV on the error report. Load tested they are dropping less than a volt.

Wheels spin freely, both sides, solenoid clicks (new BTW) and controller humms as it would if it were powering on.

scooterman · 07-25-2014, 02:17 PM

Quote:

Originally Posted by FF Titus

I don't believe it to be LBV because it's not coming up at LBV on the error report. Load tested they are dropping less than a volt.

Wheels spin freely, both sides, solenoid clicks (new BTW) and controller humms as it would if it were powering on.

Read the voltage on the big terminals of the solenoid, before and after the click.

http://www.buggiesgonewild.com/elect...tml#post928662

schematic

scooterman · 07-25-2014, 02:24 PM

Trying to narrow it down, that controller should put full power once pedal is floored to the motor. That schematic should be familiar to yours.

FF Titus · 07-25-2014, 06:22 PM

Quote:

Originally Posted by scooterman

Trying to narrow it down, that controller should put full power once pedal is floored to the motor. That schematic should be familiar to yours.

It ended up being the controller. I've never had that happen before, controller turns on, and I could plug it in, but wouldn't talk to the motor.

I'm happy this project is done.

Thank you for your help!

scooterman · 07-25-2014, 06:23 PM

Glad you have it resolved.

jjance · 07-25-2014, 06:36 PM

Did you use two wrenches to tighten the studs on the new motor. If you didn't you may have shorted something inside the motor and blew the controller. Just an after thought.

07-25-2014, 01:28 PM	#11
FF Titus Gone Wild Join Date: Jul 2011 Location: Rhode Island Posts: 489	Re: 48V Club Car New Motor not moving 2002 ds 48v

07-25-2014, 01:29 PM	#12
FF Titus Gone Wild Join Date: Jul 2011 Location: Rhode Island Posts: 489	Re: 48V Club Car New Motor not moving On the handheld, the pedal when floored only says 85% if that means anything.

07-25-2014, 01:38 PM	#13
FF Titus Gone Wild Join Date: Jul 2011 Location: Rhode Island Posts: 489	Re: 48V Club Car New Motor not moving I don't believe it to be LBV because it's not coming up at LBV on the error report. Load tested they are dropping less than a volt. Wheels spin freely, both sides, solenoid clicks (new BTW) and controller humms as it would if it were powering on.

07-25-2014, 02:24 PM	#15
scooterman Gone Wild Join Date: Jan 2014 Location: Lafayette, Louisiana Posts: 1,677	Re: 48V Club Car New Motor not moving Trying to narrow it down, that controller should put full power once pedal is floored to the motor. That schematic should be familiar to yours.

07-25-2014, 06:23 PM	#17
scooterman Gone Wild Join Date: Jan 2014 Location: Lafayette, Louisiana Posts: 1,677	Re: 48V Club Car New Motor not moving Glad you have it resolved.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-25-2014, 06:36 PM	#18
jjance Gone Wild Join Date: Feb 2011 Location: Chattanooga TN Posts: 2,105	Re: 48V Club Car New Motor not moving Did you use two wrenches to tighten the studs on the new motor. If you didn't you may have shorted something inside the motor and blew the controller. Just an after thought.

Similar Threads
Thread	Forum
club car not moving	Electric Club Car
club car not moving	Electric Club Car
1996 TXT stopped moving - motor?	Electric EZGO
Motor is revving cart barley moving maybe clutch?	Gas Club Car