lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-12-2020, 09:31 PM   #361
justwondering
A Gal with a Cart!
Yamaha
 
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
Default Re: G2/G9 Twins I've Inherited - Non-running

M10 bolts in 4 different ways.
Surely one will fit.

I'd love to have a Bolt sorter (a la CoinStar).

I also need a PVC Connector sorter.

A Drill bit/screwdriver tip sorter.

And, of course, a yarn skein sorter.

Tomorrow is Friday and I'm headed back to the Golf Cart to see if my bolts fit.

Today was the plumbing day.
We run the house on rainwater and I wanted to connect the third tank into the system. I ALMOST got it. Only had 1 leaky 2 inch PVC connector when I did the stress test. Took me 2 1/2 hours and one trip to town for glue.

Someone needs to create a PVC glue that doesn't set up before I use the entire can. If I get the small can, I run out and have to go back to the store (16 miles round trip). If I get the big can, it turns to gel, and I have to go back to the store. I went with the 'Rain or Shine' medium size container today. I'll let you know next spring if it gels up over the winter.

My hubby sat and watched me work on the plumbing. He was good... never asked about the Golf Cart until I was down to the last connector.

JW
justwondering is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-12-2020, 10:53 PM   #362
Mooncarter
Gone Insane
 
Mooncarter's Avatar
Club Car
 
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
Default Re: G2/G9 Twins I've Inherited - Non-running

Hello JW. Been a while.

I have the same issues with the PVC glue/primer. Seems like every time I need it the stuff has gone bad.
Mooncarter is offline   Reply With Quote
Old 11-15-2020, 08:54 PM   #363
justwondering
A Gal with a Cart!
Yamaha
 
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
Default Re: G2/G9 Twins I've Inherited - Non-running

And .... drum rolllllllllllll......

Plumbing. 5 connections were fine. 1 connection leaks UGH

M10 Bolt: exactly none of them fit. Apparently, I need new glasses. I only bought course pitch and I'm thinking this is a machine pitch. BLEH

But on a good note ... that means a new trip to the Co-op in town (only 16 miles round-trip). And weather has been wonderful (albeit a little blustery). 70's.

Bless you and thank you lord.

JW
justwondering is offline   Reply With Quote
Reply

Tags
g2/g9
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Inherited a beat up EZ Go - Where do I start? Electric EZGO
Inherited pds problem Electric EZGO
I inherited a Club Car! Electric Club Car
Inherited Dead Club Car Electric Club Car


All times are GMT -5. The time now is 06:46 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.