Controller issue

[98f150tonyo]

I have a western limo that I recently bought with a SepEx 1264-5407 controller, I charged the batteries and the status light is flashing 1,2. The cart does not run but everything else works can someone please help? Thank you in advance

[JohnnieB]

Error code 1-2 is an ITS throttle fault.

Here is a manual for a ST400, which has a 1264 controller and ITS throttle, so those sections of the manual ought to apply to your cart. Maybe other sections as well, Western just put their bodies on a EZGO chassis.

[98f150tonyo]

Originally Posted by JohnnieB

Error code 1-2 is an ITS throttle fault.

Here is a manual for a ST400, which has a 1264 controller and ITS throttle, so those sections of the manual ought to apply to your cart. Maybe other sections as well, Western just put their bodies on a EZGO chassis.

Thank you very much johnnieb I really appreciate it

[98f150tonyo]

So I am looking for the the location of the ITS and throttle switch on my cart it’s a limo and there’s no access from under the carpet. I am getting the code 1,2 on the status on the controller. Any help will be appreciated also stamped on the frame is the number 24303 is that the serial or model number?

[JohnnieB]

Lift cart, put on jackstands and crawl under it. Find the pedal linkage and follow it back.

On regular cart, the rubber floor mat has to be lifted to access the pedal box. The side rails that hold the mat down have to be removed. Same setup on a Shuttle-6, but don't know if that is the EZGO chassis Western used.

[98f150tonyo]

Originally Posted by JohnnieB

Lift cart, put on jackstands and crawl under it. Find the pedal linkage and follow it back.

On regular cart, the rubber floor mat has to be lifted to access the pedal box. The side rails that hold the mat down have to be removed. Same setup on a Shuttle-6, but don't know if that is the EZGO chassis Western used.

Thank you again for all your help