|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-10-2023, 03:43 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2023
Posts: 5
|
Wiring issue
Ok so I bought a new set of wires for the cart Ezgo txt, so far I replaced battery to the solenoid, and 2 from F/R switch to controller, now I got no forward just solenoid clicking, but I do have reverse, I do not know what the hell happened.
Any help would be greatly appreciated. Thank you |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-10-2023, 04:13 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,887
|
Re: Wiring issue
If you could give us some more info on your cart, we can better help you. Year? 36 or 48 volt? DCS? PDS?
|
|
|
|
|
12-10-2023, 04:26 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2023
Posts: 5
|
Re: Wiring issue
Its 36volt DCS,
|
|
|
|
|
12-10-2023, 04:32 PM
|
#4 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,860
|
Re: Wiring issue
Assuming the 'wires' are cables...
DCS does not have cables at the F&R, maybe it's series drive? |
|
|
|
|
12-10-2023, 04:40 PM
|
#5 |
|
Not Yet Wild
Join Date: Dec 2023
Posts: 5
|
Re: Wiring issue
These are 2gause cable set replacing ones coming from motor and F/R switch
|
|
|
|
|
12-10-2023, 04:44 PM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2023
Posts: 5
|
Re: Wiring issue
Only replaced 3 cables so far did one by one with battery unhooked, upgrading the wires to 2 gauge has heavy duty solenoid and F/W switch,
|
|
|
|
|
12-10-2023, 04:57 PM
|
#7 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,688
|
Re: Wiring issue
Check the connection to the Forward part of the FNR switch. Sounds like you are not getting continuity in the FWD mode. Maybe you damaged the switch connecting the new cables.
|
|
|
|
|
12-10-2023, 05:22 PM
|
#8 |
|
Not Yet Wild
Join Date: Dec 2023
Posts: 5
|
Re: Wiring issue
ok I figure it out, I took of the backup buzzer to get easier access to one of the cables,, one of the screws holds the micro switch in place so it was moving not making the switch. I appreciate the help, thank you
|
|
|
|
|
12-10-2023, 06:34 PM
|
#9 |
|
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 3,461
|
Re: Wiring issue
When you change the motor cables, be sure to use 2 wrenches on the stud nuts.
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 97 TXT Wiring Issue | Electric EZGO | |||
| Wiring issue | Electric EZGO | |||
| 87 ez go wiring issue | Electric EZGO | |||
| txt wiring issue | Electric EZGO | |||
| wiring issue | Electric Club Car | |||
Linear Mode
