problem with reverse

jim,s · 10-21-2015, 06:00 AM

1980 club car ds replaced 1 solenoid out of 5 that tested bad. replaced all 5 micro switches for the pedal assy. new set of batteries 4 weeks ago. going forward the cart runs fine seems like you can feel it go all the speeds as it should. but in reverse you have to press the pedal halfway down then bam it takes off at a fast speed. you need a neck brace.
thanks for any help with this problem.

10-21-2015, 06:30 AM

reverse should be 18v in reverse
green wire (factory color)

10-21-2015, 06:00 AM	#1
jim,s Gone Wild Join Date: Mar 2015 Location: central florida Posts: 368	problem with reverse 1980 club car ds replaced 1 solenoid out of 5 that tested bad. replaced all 5 micro switches for the pedal assy. new set of batteries 4 weeks ago. going forward the cart runs fine seems like you can feel it go all the speeds as it should. but in reverse you have to press the pedal halfway down then bam it takes off at a fast speed. you need a neck brace. thanks for any help with this problem.

10-21-2015, 06:30 AM	#2
crash test dummy Guest Posts: n/a	Re: problem with reverse reverse should be 18v in reverse green wire (factory color)
crash test dummy Guest Posts: n/a

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
problem with reverse	Electric Club Car
TXT with reverse problem	Electric EZGO
Reverse problem	Electric Club Car
Reverse problem	Gas EZGO
Problem with Reverse	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum