Club Car DS Shocks

[natez]

I have an '86 Club Car DS. It has a lift kit on it, but not sure the make of the kit. Is it likely that it has stock size shocks on it or an aftermarket size? One of my shocks is totally burnt out and I want to order a new set.


Thanks,
Nate

[Swan]

here is the Monroe PDF of length and styles

http://www.buggiesgonewild.com/attac...1&d=1383610320

Here is my DS motor swap where I replaced my shocks

http://www.buggiesgonewild.com/elect...000-cc-ds.html

[natez]

So you measured what you needed and then just went to the autoparts store? I was just hoping to order some club car ds shocks off the Internet but your saying I need a different size since its lifted?

[miker]

Monroe's are half the price,there abouts I just ordered mine from wallyworld

[natez]

I see there are a couple different types of shocks they have, which ones should I be looking at? OEMSpectrum, Monroe Matic or? Just want inexpensive shocks that work. Do they come with the bushings?

[miker]

I got 5753 I didn't pick them up yet but I think it does come with bushings,keep the old ones just in case,sensa-trac is what these are called,in the pic it shows bushings for the stud side.. google Monroe 5753 shock take a look good luck

[Swan]

stock shocks would still bolt into my cart with lift. I chose to get Monroe shocks for my cart . but you could go to any of the site sponsors that sell shocks and get the same thing you had .

[Sergio]

The Monroe 5753 shocks don't appear to have the correct mounting ends like the Monroe 31176 (3/8-16 stem in both ends).

[miker]

Originally Posted by Sergio

The Monroe 5753 shocks don't appear to have the correct mounting ends like the Monroe 31176 (3/8-16 stem in both ends).

mine is a 92 it has stud at top ring on bottom,you have to look at the Monroe chart,and measure your shocks for the right length,and ends