|
09-16-2019, 07:38 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2019
Location: Indiana
Posts: 17
|
2004 ezgo txt
I installed a new carberator and driven clutch 28 degree. Under load cart is sputtering and has no power. I adjusted the valves and it has 150 compression on both cylinders. Any ideas greatly appreciated
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-17-2019, 06:05 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 ezgo txt
If it's an aftermarket carburetor they are junk, better to buy oem or rebuild the one you have.
|
|
|
|
|
09-17-2019, 06:15 AM
|
#3 |
|
Gone Wild
Join Date: May 2019
Location: Georgia
Posts: 389
|
Re: 2004 ezgo txt
yes sir, those $49.95 carbs on the internet are not the answer, when we recommend a new $300 carb to a customer some will say i can get one cheaper on the internet....well than take your cart home and ignore the experience we have to offer...than i will see you again in a few months, than maybe you will listen. A fool and his money are soon departed.
|
|
|
|
|
09-17-2019, 06:42 AM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2019
Location: Indiana
Posts: 17
|
Re: 2004 ezgo txt
I wondered. I only gave 25 bucks for it. Do you guys have a link for a good carburetor?
|
|
|
|
|
09-17-2019, 09:00 AM
|
#5 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,666
|
Re: 2004 ezgo txt
https://shop.txtsv.com/carburetor-as...mm-venturi-9hp
Before dropping 200 bucks on a new one, is there damage or something preventing you from cleaning your old OEM carb? Usually a good cleaning and blowing out with compressed air is all they need and they're as good as new again. |
|
|
|
|
09-17-2019, 02:16 PM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2019
Location: Indiana
Posts: 17
|
Re: 2004 ezgo txt
No sir and that's exactly what I will try. When I took the old one off and installed new one there was 2 spacers I put them both twords the head but I'm wondering if I should have put the thinner one between air breather and carb.cant seem to find a picture to look at. Usually I take a picture before I take it apart but didn't this time.
|
|
|
|
|
09-17-2019, 02:47 PM
|
#7 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,214
|
Re: 2004 ezgo txt
Here u go
|
|
|
|
|
09-17-2019, 03:13 PM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2019
Location: Indiana
Posts: 17
|
Re: 2004 ezgo txt
Am I correct to assume there's only one spacer between carb and head? This doesn't show on other side of carb. I have 2 spacers or they call them insulators. One is like 2 inches wide and one is like a inch wide. I put them both between carb and head.im betting I messed up there?
|
|
|
|
|
09-17-2019, 07:40 PM
|
#9 | |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,214
|
Re: 2004 ezgo txt
Quote:
https://shop.txtsv.com/vehicle/index...G01%7c%7eE-1/y |
|
|
|
|
|
09-18-2019, 01:51 AM
|
#10 |
|
Not Yet Wild
Join Date: Jun 2019
Location: Indiana
Posts: 17
|
Re: 2004 ezgo txt
Thank you very much.
|
|
|
|
 |
| Tags |
| no power |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2004 ezgo pds | Electric EZGO | |||
| ~~~~~~2004 EZGO Gas Stock unmodified new EZGO CARB~~~~ | Golf Carts and Parts | |||
| 2004 Gas EZGo | Electric EZGO | |||
| 2004 ezgo txt | Electric EZGO | |||
| 2004 ezgo MPT | Gas EZGO | |||
Linear Mode
