|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-21-2019, 10:54 PM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Fuel gauge instrument plate
Hey fellows
Been thinking a lot lately about adding a oil pressure gauge to my cart was thinking about using a oem fuel gauge mounting plate and just using a digital gauge in its place Any advise is appreciated Also what size hole is there for the gauge 2 or 2 1/16in Thanks guys |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-22-2019, 10:29 AM | #2 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: Fuel gauge instrument plate
I installed one in a cart a while back using the key switch plate. I used a 2 inch metal hole saw and it worked .. Actually looked good except it covered part of the EZGO emblem . The fuel gauge should be the same hole. The bracket that came with my oil gauge is 2 1/16 inch but the 2 inch worked. I didn't need that bracket because I used the key switch plate. It was tight and didn't require any other mounting. I also didn't have a 2 1/16th hole saw I put a drop of Gorilla Super on mine. It ain't coming out
|
12-22-2019, 08:58 PM | #3 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: Fuel gauge instrument plate
Perfect thank you
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Fuel Gauge | Gas Club Car | |||
Yamaha Concierge Drive/29 ---Fuel Gauge Replacement/Fitment for GlowShift Gauge | Gas Yamaha | |||
Fuel gauge, oil gauge, ignition for dash kit relocation/not working | Gas Club Car | |||
Fuel Gauge | Gas EZGO | |||
Fuel Gauge Help | Gas EZGO |