|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-02-2020, 11:14 AM | #1 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
83 Yamaha G1 w/ Enticer250 Head
*Taking offers*
(I know its not a for sale thread but for some reason I cant post there) I finished a few years back. Lost the phone with build pictures though. Engine fully rebuilt with Larger Enticer 250 Head Rear End rebuilt Large Carb Custom throttle and chock lines Stock Exhaust pipe Stock Clutch (rebuilt) Candy Paint and custom made windshield Radio Rear Seat Its fast and sounds deeper than original but also louder (lol). Average speed around 25mph. Downhill 32mph. More picture from Craigslist Add. https://atlanta.craigslist.org/sat/f...188924731.html |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2020, 04:18 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: 83 Yamaha G1 w/ Enticer250 Head
You can't post in the parts section because you don't have enough posts. I think you need 4 posts.
With that said, I have some questions: 1. Does it have an Enticer 250 head? Or entire top end (cylinder, piston, head)? 2. You say it has a larger carb....What size? Brand? |
09-02-2020, 05:44 PM | #3 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
it has full top end. Since it has larger piston (if memory serves me correctly), rings, ect. Either way I change all new parts and gaskets. Intake was completely different from stock. No reed valves. This is a port valve head.
Let me check on the carb brand/model tomorrow. It was a piston style carb and I change the jetting size correctly for idle and full throttle. Looks like one from a small motorcycle. |
09-03-2020, 12:36 PM | #4 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
Mikuni Vm Carb. Either the 28 or 30 model. Cant remember or find my paper work. I purchased a few different jets and tuned it in which ones performed the best.
I also have a lot of extra parts I will sell/give with golf cart. clutches generator/starter switches and solenoids rear golf rack tools for clutches I bought a used junk yard golf cart and kept alot of extra random parts. |
09-03-2020, 03:02 PM | #5 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: 83 Yamaha G1 w/ Enticer250 Head
You should be able to post in the for sale section now.
|
09-25-2020, 08:16 AM | #6 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
bump $1800
|
10-27-2020, 11:01 AM | #7 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
Bump $1600
|
10-27-2020, 05:40 PM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: 83 Yamaha G1 w/ Enticer250 Head
Edited
See also in for sale section Moderators should we keep this thread since it's in Parts & Carts ? |
11-06-2020, 06:33 PM | #9 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
mods can delete this thread if you want. I like the extra exposure but up to you guys.
either way. thanks |
04-06-2021, 06:09 PM | #10 |
Not Yet Wild
Join Date: Dec 2011
Location: Senoia GA
Posts: 17
|
Re: 83 Yamaha G1 w/ Enticer250 Head
sold for $1900
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G14 yamaha j38 engine cylinder head. | Gas Yamaha | |||
Wanted: 82 Yamaha J17 cylinder head or enticer 250 head | Golf Carts and Parts | |||
Yamaha G2 Head | Golf Carts and Parts | |||
Yamaha G14-G20 head light kit | Golf Carts and Parts | |||
need a cylinder head for yamaha g16 a 2001 | Gas Yamaha |