|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-19-2011, 07:30 PM | #1 |
Not Yet Wild
Join Date: Aug 2011
Location: High Springs FL
Posts: 44
|
ProTech 48v charger
So ive done all the reading of the manuel and Scotty's notes about the charger. The profile setting is obvious from the manuel, Profile 2 for US Batteries. As i just took delivery of 8 - US2200 batteries...Now my question is, The manuel says for the absorbtion/conditioning switch "a 4 hour timer switch setting is typically used on 220 A/H system batteries." The US2200 are 225 A/H. Now in Scottty's notes hes states the switch "may be set to the 6 hr Absorbtion rate for 8/6v" set up. So whats the better choice, 4 or 6hr, and why. Thx adhead of time for helping this NEWBIE out!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Protech onboard charger question? | Electric EZGO | |||
Issue W protech 48v on board charger? | Electric EZGO | |||
onboard protech charger | Electric EZGO | |||
Protech On Board Charger Question | Electric EZGO | |||
How to hook up 12volt charger with 36 volt charger to charge 48 volts | Electric EZGO |