|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2012, 12:52 PM | #1 |
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Programming Alltrax controller question
I'll be doing some work on a friend's cart he purchased last year from a dealership that builds their own version of a hunting cart. It is ridiculously jumpy when you hit the throttle. He asked me to see if I could fix that while I am at it. Sure, no problem. So my question is this... When I plug the controller up to program will it show the current settings and I can just tweak them from there? Or will I have to start fresh with all new settings?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2012, 04:09 PM | #2 |
Gone Wild
Join Date: Aug 2011
Location: Tyler, Texas
Posts: 661
|
Re: Programming Alltrax controller question
The program will show the current settings when you open the program. After you change any settings make sure you click the "set" button or your changes will not take.
|
06-30-2012, 04:10 PM | #3 |
Gone Wild
Join Date: Aug 2011
Location: Tyler, Texas
Posts: 661
|
Re: Programming Alltrax controller question
plug the cord from the controller to your laptop, power up the controller, then open the program or it will not find the controller.
|
06-30-2012, 04:17 PM | #4 | |
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Re: Programming Alltrax controller question
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Controller (Alltrax) Programming tips | Electric Club Car | |||
Alltrax Controller Programming for Precedent | Electric Club Car | |||
Programming alltrax controller | Electric EZGO | |||
Alltrax Programming Question | Electric EZGO | |||
what is the best programming for an alltrax controller | Electric EZGO |