|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-16-2013, 12:06 PM | #1 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Seat back to close after backseat instalation
Any suggestions??
I have a 2002 CC DS. When I got it, it already had a rear flip seat installed. The seat back supports that come with it push the front seatback closer to the steering wheel. Is there someplace I can get new posts that will work with the flip seat, but bring the seat back to it's original position? I don't now the brand or model of the flip seat, but if you look at my avatar or in my album, you can see pictures of it. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2013, 02:54 PM | #2 |
Getting Wild
Join Date: Mar 2013
Location: Southern Illinois
Posts: 94
|
Re: Seat back to close after backseat instalation
I have read post numerous times about the same issue your talking about.
I have been wanting a back seat but Im not sure if I do anymore because of this issue. |
03-16-2013, 04:19 PM | #3 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Re: Seat back to close after backseat instalation
Ya Dog,
I don't know if it just one specific brand or if all seats will causes this. Just wish someone had an idea for how to correct the issue..... |
03-17-2013, 10:27 AM | #4 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Seat back to close after backseat instalation
I don't know much about rear seats. I was going to put one on my cart when I got it, but then realized the cart would not fit onto my 5X8 trailer with the back ramp up!
|
03-17-2013, 12:22 PM | #5 |
Gone Wild
Join Date: Jul 2012
Posts: 366
|
Re: Seat back to close after backseat instalation
I bought the allsport flip seat and it is the brand that does that. I had to rebuild the lower bracket and moved the mount back two inches. Then where the armrest bolts to the footrest I drilled those holes two inches back as well. Anyone with a grinder a welder and a drill can do it .
|
03-17-2013, 12:23 PM | #6 |
Gone Wild
Join Date: Jul 2012
Posts: 366
|
Re: Seat back to close after backseat instalation
Basically the piece of angle needs to be cut or ground off and re welded further back.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Back seat help | Gas EZGO | |||
cant close seat | Big Block Talk! | |||
seat back | Gas Harley Davidson | |||
G1 Back Seat???? | Gas Yamaha | |||
WTB: back seat | Golf Carts and Parts |