Need Altrax EXPERT 48v 96'

[orions empire]

I am getting 48v at pin1 when pedal is pressed.

[scottyb]

Then why is the light going out? The green light indicates power at pin 1

[orions empire]

Is there a way to reset the Controller or maybe has gone wrong?

[scottyb]

Disconnect B- and reconnect the controller will reboot. I doubt that's the problem. YOu say there is FOR SURE positive power at pin #1 when the gas is say 25-50% depressed and you have no LED light? The controller may be damaged.

[orions empire]

I only tested Pin1 at fully depressed pedal, and received 48v. Will test at 25%-50% throttle.

Scottyb, you are an asset to this community, thank you for your support.


Where can I send the Controller to be repaired?

[scottyb]

Originally Posted by orions empire

I only tested Pin1 at fully depressed pedal, and received 48v. Will test at 25%-50% throttle.

Scottyb, you are an asset to this community, thank you for your support.


Where can I send the Controller to be repaired?

Call Alltrax, ask for the tech support. Tell them what we tested for here and ask if they think the controller needs repair. They are the only ones I know of for this control. Thank you.

[orions empire]

thank you scottyb.