|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-23-2013, 08:06 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2013
Posts: 2
|
Please help
Ok fellas, here's a tricky one. I have a 95 medalist electric. Cart ran fine and I made the mistake of letting my son get on it. Well, long story short, he kept the gas pedal pressed when he was switching from
Forward to reverse and now the cart won't run. I have traced all wires and followed the troubleshooting guide in the technical manual. All voltage is good, silenoid clicks, micro switch is good, the place where I get 0 voltage is the its. The white and black wires have no voltage at all. Is it possible for the its to be bad? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-23-2013, 08:14 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Please help
The voltage for the ITS comes from the controller
|
|
|
|
|
04-23-2013, 08:36 AM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2013
Posts: 2
|
Re: Please help
That's what I was afraid of. Thanks I will get it checked.
|
|
|
|
Linear Mode
