|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-23-2013, 12:45 PM | #11 |
Gone Wild
Join Date: Mar 2012
Location: Cullman, AL/Destin, FL
Posts: 268
|
Re: How many ft of cable for 6 x 8v?
I just made a set of 2ga for my precedent. I purchased 30' of cable and had a good bit left over. I will measure when I get home and tell you how much it took. I got mine for about $1.20 per foot. I crimped mine with large commercial type crimpers. I got three crimps per lug and then applied shrink wrap. I did find that the 2 ga wire would go in 4ga lugs. It was a very tight fit and I had to try several lugs to get ones they would fit in. I used these because I felt like the large crimpers with the tight fitting lugs would make for a better connection. I did not use tinned copper lugs since I did not know they were preferred when I made my cables. I keep the terminals sprayed so I hope I do not have any corrosion issues.
Does your cart have an OBC? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-23-2013, 05:07 PM | #12 |
Not Yet Wild
Join Date: Jan 2010
Location: South GA
Posts: 29
|
I used 17 ft of 2 gauge when I did the 6 8v conversion on the Precedent.
Sent from my DROID RAZR using Tapatalk 2 |
04-23-2013, 07:21 PM | #13 |
Gone Wild
Join Date: Mar 2012
Location: Cullman, AL/Destin, FL
Posts: 268
|
Re: How many ft of cable for 6 x 8v?
Just measured my leftover cable and I used slightly over 17ft.
|
04-23-2013, 07:28 PM | #14 |
Gone Wild
Join Date: Mar 2012
Location: Palatka, Fl
Posts: 799
|
Re: How many ft of cable for 6 x 8v?
I am glad I still have over 100' of 2 awg welding cable, I removed from jobs I demoed
|
04-24-2013, 11:56 PM | #15 |
Gone Wild
Join Date: Nov 2008
Location: Texas Hill Country
Posts: 426
|
Re: How many ft of cable for 6 x 8v?
I ordered 20' of cable, 24 lugs, heat shrink and a crimper. This was plenty to convert a 04 precedent as per the stickies. I spent just over $100 dollars and supplies were shipped to my door. weldingsupply.com has a good price on the 2awg cable and also has a nice color assortment so you can keep colors the same as factory. I do think scottyb cables are better quality than what i built but i like the fact that i built my own and they are alot better than stock.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Shift Cable or F&R Cable Adjustment | Gas Yamaha | |||
CC Bat Cable | Electric Club Car | |||
Convert dual cable shifter to single cable shifter? | Gas EZGO | |||
Cable ends for #2 welding cable | Lifted Golf Carts | |||
F&R single cable to dual cable? | Big Block Talk! |