|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-28-2013, 08:26 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Location: Alabama
Posts: 14
|
Microswitch
My accelerator micro switch is bad. Could anyone tell me if it can be wired backwards. Roller switch with two contact points. One side has wire from shifter roller switch and wire to controller. Other contact has wire to solenoid. Does it matter which side of micro these wires connect to? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-28-2013, 09:03 PM | #2 |
Guest
Posts: n/a
|
Re: Microswitch
|
08-28-2013, 09:09 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Location: Alabama
Posts: 14
|
Re: Microswitch
89 EZGO Marathon, Beast motor, 700 amp controller, 48 volt, lift, 22 inch tires.
|
08-28-2013, 09:43 PM | #4 |
Guest
Posts: n/a
|
Re: Microswitch
sorry i don't have a 1989 EZ GO 48v W/controller diagram
|
08-29-2013, 03:40 AM | #5 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Microswitch
Quote:
|
|
08-29-2013, 08:40 AM | #6 |
Not Yet Wild
Join Date: Aug 2013
Location: Alabama
Posts: 14
|
Re: Microswitch
Thanks yurtle. That's what I thought but wanted to be sure.
|
08-29-2013, 09:03 AM | #7 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Microswitch
It doesn't actually matter, but the wire coming from the voltage source is usually connected to the "C" (Common) terminal.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'96 CC 48v Microswitch | Electric Club Car | |||
One Microswitch? | Electric EZGO | |||
Microswitch | Electric EZGO | |||
Microswitch | Electric Club Car | |||
i just took apart my first microswitch | Electric EZGO |