12-28-2013, 12:30 PM | #1 |
Gone Wild
Join Date: Sep 2009
Location: WI
Posts: 157
|
motor test
Does anyone have the wiring config for testing a 97 CC motor I have some old notes but dont know if they are right .
I have A1+ Connect A2 to S1 and S2 to Neg ?? And how much vlotage should I use ?? MADDOG |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-29-2013, 08:02 AM | #2 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: motor test
Remove all cables from the motor; connect a jumper from A1 to S1. Connect 12 to 24 volts, positive @ A2 and negative @ S2. Swap S1 and S2 to change rotation direction . . . .
|
12-29-2013, 08:55 AM | #3 |
Gone Wild
Join Date: Sep 2009
Location: WI
Posts: 157
|
Re: motor test
Thanks Steve .
|
12-29-2013, 02:38 PM | #4 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: motor test
Quote:
If the cart has a TOW/RUN switch, put it in tow before you do any work on the electric system, Use two wrenches to remove the cables from the motor |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor Test | Electric Yamaha | |||
Motor Test | Electric Club Car | |||
How can I test my motor??? | Electric Club Car | |||
Motor Test | Electric Club Car | |||
Motor test | Electric EZGO |