PQ Bandit .vs. D&D 81-14 .vs. ?? electric motor

[scooterman]

GE makes a really good motor also, probably one of the factory best. JMO

[Revolution]

I went with PQ rattlesnake 2. D&D did not really want much to do with 72 volts. I don't know what the rattlesnake will do on 48volts, but on 72volts with 20 inch tires I can do 40 mph, i don't ever really go that fast but it can do it. I run 30 most of the time with 50% throttle.

Edit to add: 450 amp alltrax controller. max amps I have ever seen on this setup was less than 300 depending on which meter I trust. One said 260 another was 285 the other was 290 something.

[Speedchaser]

Originally Posted by scooterman

GE makes a really good motor also, probably one of the factory best. JMO

Pretty sure ge is out of golf cart motors and advance motors would be the mirror replacement. I believe they have a motor that can get you to 25with just motor upgrade. we ran the ge motor at 25 on series cart and no other upgrades.

Club Car AMD 7119 4.0/5.5 Non-Peak HP @ 4150/5700 RPM 36-48 Volt, 25 MPH, (Higher Speed) DC Electric Motor

[InVision]

AMD 7119 Replacement for D380 (D-380) Golf Car Motor for Club Car & Older Yamahas. D-380 The "Eye-opener" This is an eye-opener! Speeds up to 25 MPH! This is a replacement for General Electric motor which is rated at 4 HP @ 4150 RPM for a 36 volt system and 5.5 HP @ 5700 RPM for 48 volt system.

The motor mounts via a 10 tooth female spline coupler used with the Graziano and Kawasaki axles. These axles were used in Club Car and older Yamahas.

This is a series wound motor for use with a series or fleet system only. Not for use with Power Drive Plus (Regen I or II versions), IQ, or any other Club Car golf cart or utility vehicle with a separately excited motor and regenerative braking.

Use with 400+ amp controller NEW CONTROLLER

[Speedchaser]

If you have regen or sepex system this motor won't work.
Advance also makes a sepex that gets 25, its what I am running, however I upgraded my controller and never tested it with stock controller.

[Speedchaser]

AMD 48-volt, 7-hp@5106 rpm speed and torque motor. This motor requires controller #GCT10620 for DS, Precedent all years, #GCT107107 or #GCT107108 for 2000-08, 2010-11 DS, Precedent. For maximum performance, safety and durability 4 gauge cables (#1260) throughout the car and heavy-duty solenoid are required. For Club Car IQ 2000-up DS, Precedent

[scooterman]

Originally Posted by Speedchaser

AMD 48-volt, 7-hp@5106 rpm speed and torque motor. This motor requires controller #GCT10620 for DS, Precedent all years, #GCT107107 or #GCT107108 for 2000-08, 2010-11 DS, Precedent. For maximum performance, safety and durability 4 gauge cables (#1260) throughout the car and heavy-duty solenoid are required. For Club Car IQ 2000-up DS, Precedent

How fast is the speed and torque motor?

[Speedchaser]

25 on flat paved ,this motor has good torque though but slows on grass surface probably to 20

[sunoco]

Originally Posted by scooterman

GE makes a really good motor also, probably one of the factory best. JMO

Love me a D380. I buy them whenever I see them.

Built a cart for my uncle running a D380 and Alltrax SPM 400A and see 24-26 mph with awesome torque.

[sunoco]

Originally Posted by Speedchaser

AMD 48-volt, 7-hp@5106 rpm speed and torque motor. This motor requires controller #GCT10620 for DS, Precedent all years, #GCT107107 or #GCT107108 for 2000-08, 2010-11 DS, Precedent. For maximum performance, safety and durability 4 gauge cables (#1260) throughout the car and heavy-duty solenoid are required. For Club Car IQ 2000-up DS, Precedent

He has a series cart. This motor reccomendation will not work