|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-09-2014, 12:21 PM | #1 |
Not Yet Wild
Join Date: Oct 2013
Location: Oldsmar, FL
Posts: 21
|
How to wire a steering wheel horn
I purchased a steering wheel with a horn in the middle, like a car horn. I don't know how to wire this thing up. There's no hole in the adapter for wires to run through.
There are two contacts under the horn button but I'm not sure if I need to hook + or - to those wires. This came with absolutely no instructions. I'm assuming that I run 12v+ to one side and come off the other lead to the horn. The other question I have is once I get wires into the horn area, what prevents those wires from being twisted all the way around when I turn? I was thinking about coiling up a wire, like an old phone cord (showing my age), inside the horn assembly but am not sure if that would work. Anyone have any ideas on this? I purchased this steering wheel with the CC DS Chrome adapter. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-09-2014, 05:52 PM | #2 |
Gone Wild
Join Date: Jul 2008
Location: mass
Posts: 654
|
Re: How to wire a steering wheel horn
its a lot easier to put a foot switch in, if you lift up floor mat there is all ready a hole there, a lot of wheels are made for cars and trucks
|
04-09-2014, 06:00 PM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: How to wire a steering wheel horn
You can't do it on a Cart, there's no room to run the wires in the steering column, and you only have half of what you need
|
04-09-2014, 06:26 PM | #4 |
Crazy Buggy Wild !!
Join Date: Mar 2014
Location: Destin, Florida
Posts: 595
|
Re: How to wire a steering wheel horn
Nice wheel. I bought this for my horn button.
M |
04-09-2014, 06:28 PM | #5 |
Gone Wild
Join Date: May 2012
Location: Lansing,MI
Posts: 177
|
Re: How to wire a steering wheel horn
It is possible to do, you will need a plate with spring loaded contacts for power and ground, that will keep the wires from twisting, its doable, but the floor switch is alot less headaches!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
wireing steering wheel horn | Gas Club Car | |||
How to get wire to back of steering wheel? | Electric EZGO | |||
steering wheel horn kit | Electric Club Car | |||
Help with new steering wheel horn kit.. | Electric Club Car | |||
Wiring a 8 Wire Turn Signal w/ Horn | Electric EZGO |