2008 prec "Main welded" slow speed

GEVJOE · 08-19-2014, 02:00 PM

OK JUST realized this is a 06!!! so sorry!!! but anyways checked diagram and saw that diode was a OPTION?? no diode on this car so I installed one and still same result. thanks again

scooterman · 08-19-2014, 04:23 PM

So if you remove large wire on solenoid, does it still show the code? Test that with the wire disconnected, use tape it insulate temporarily.

GEVJOE · 08-20-2014, 11:54 AM

yes it does

scooterman · 08-20-2014, 12:45 PM

Quote:

Originally Posted by GEVJOE

yes it does

you said you swapped everything, is there by any chance you could try another controller, this time make sure to keep that big wire off the solenoid taped up, before powering up, see if you get the code. If it does then you have wires crossed somewhere, basing this off you replacing everything else.

GEVJOE · 08-20-2014, 02:45 PM

Ok first and foremost thanks to all that helped esp Scooterman. This is what I found after removing entire harness and swapping from good cart I noticed my tech had hooked aftermarket strobe light up to key switch for power. This obviously was causing a backfeed of power fooling the computer into thinking it had a "welded" solenoid. after disconnecting this no codes were found!! Thanks again

scooterman · 08-20-2014, 02:58 PM

That is great news, sorry for asking you to do all sorts of weird things but I find little things like that will screw up all sorts of things. Congrats

08-19-2014, 02:00 PM	#11
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38	Re: 2008 prec "Main welded" slow speed OK JUST realized this is a 06!!! so sorry!!! but anyways checked diagram and saw that diode was a OPTION?? no diode on this car so I installed one and still same result. thanks again
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38

08-19-2014, 04:23 PM	#12
scooterman Gone Wild Join Date: Jan 2014 Location: Lafayette, Louisiana Posts: 1,677	Re: 2008 prec "Main welded" slow speed So if you remove large wire on solenoid, does it still show the code? Test that with the wire disconnected, use tape it insulate temporarily.

08-20-2014, 11:54 AM	#13
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38	Re: 2008 prec "Main welded" slow speed yes it does
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38

08-20-2014, 02:45 PM	#15
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38	Re: 2008 prec "Main welded" slow speed Ok first and foremost thanks to all that helped esp Scooterman. This is what I found after removing entire harness and swapping from good cart I noticed my tech had hooked aftermarket strobe light up to key switch for power. This obviously was causing a backfeed of power fooling the computer into thinking it had a "welded" solenoid. after disconnecting this no codes were found!! Thanks again
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38

08-20-2014, 02:58 PM	#16
scooterman Gone Wild Join Date: Jan 2014 Location: Lafayette, Louisiana Posts: 1,677	Re: 2008 prec "Main welded" slow speed That is great news, sorry for asking you to do all sorts of weird things but I find little things like that will screw up all sorts of things. Congrats

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
EZGO PDS "welded solenoid" code	Electric EZGO
2008 Club Car or PDS for lifting with 23" tires and 14" wheels	Lifted Golf Carts
"slow" Precedent "need Speed"	Gas Club Car
99 club Car no "slow" speed	Gas Club Car
2008 Drive "surges' at low speed	Electric Yamaha