|
02-08-2015, 01:25 AM
|
#11 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: OH so sad
We'll cut you some slack goldwinger, don't let it happen again!
 brain fart however...  Carry on! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-08-2015, 09:53 AM
|
#12 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
well any help and sorry for the screw up
|
|
|
|
|
02-08-2015, 10:06 AM
|
#13 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: OH so sad
No worries!
 Question.... are you running an open carb? or do you have the intake and air box hooked up? IF... your running an open carb, cover 3/4+ of the carb intake with your hand and see if it fires up. (Kawi engines won't start or run well with an open carb)  |
|
|
|
|
02-08-2015, 11:35 AM
|
#14 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
Ok...the carb is open noting hooked up and the exhaust pipe is not hooked up either.would that cause a problem also?
|
|
|
|
|
02-08-2015, 01:14 PM
|
#15 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
well I tried to start it again but the engine just pushes compression air and gas out of the air filter end of the carb.i even put the air filter hose back on to the air filter..so what now
|
|
|
|
|
02-08-2015, 01:34 PM
|
#16 | |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: OH so sad
Quote:
It's possible that the camshaft to crankshaft timing is 180 degrees out, I don't know what your rebuilder took apart to replace your piston, but it's possible to not time the cam properly! (past experience with cars!  )I have no other ideas!  |
|
|
|
|
|
02-08-2015, 02:20 PM
|
#17 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
can you call me? I will PM you cell number now
|
|
|
|
|
02-08-2015, 02:22 PM
|
#18 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
I just PM my number to ya
|
|
|
|
|
02-08-2015, 04:23 PM
|
#19 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: OH so sad
It was good talking with you Ted!
 As I said on the phone, do a compression test before pulling the engine and tearing it apart! anything less then 165/160psi may prove internal difficulties! and don't hesitate to continue to ask questions! (that's what BGW is here for!)  |
|
|
|
|
02-08-2015, 07:04 PM
|
#20 |
|
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
Thanks lockman enjoyed talking to you also
|
|
|
|
 |
|
||||||
|
|
Linear Mode
