2005 exgo txt lift question - additional rear springs needed?

[ezgo-ntxn]

Guys, I'm new to this forum and the world of electric cart customizing, I work on our ATVs and UTVs, but we just bought a used golf cart for the ranch and neighborhood. 2005 TXT PDS with rear flip seat, completely stock, except for the rear seat.
I am planning on adding a 6" spindle lift and 22" tires, my question is will a Jake's or other lift help level out the rear of the cart (i'm assuming from the weight of the seat config) or should I add a different rear spring setup to bring it back up to level or even a little higher for hauling weight?
Thanks for the input, I have used some boating forums and gotten some great info so I wanted to give this a shot.
Sorry for the long post...

[beater cart]

You will need HD rear springs for the rear.

[ezgo-ntxn]

thanks beater cart,
any models or manufacturer you recommend? I see in your pic you have a lifted cart similiar to where I am headed, is a particular setup working well for you?

[beater cart]

I just ordered some after market springs with three leafs to them. I currently have stock ezgo four leaf pack I can tell you it rides like a dump truck. Also one of our sponsors has a two leaf pack HD spring which will take 500 lbs over stock springs and suppose to give a manageable ride. I will give a review of my new springs after I install them and test run the cart.

http://www.cartpartsplus.com/ezgo-he...ng?search=rear spring