|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-28-2022, 07:32 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 7
|
Programming Speed Code 4 with Curtis software- not working
i have a 2009 precedent with a curtis model 1515-5201 controller
Bought the speed code 4 A,B and C parameters for speed code 4 from club car i have the curtis software, figured i put them in myself Wrong - the numbers are accepted but it stays at speed code 3 even after i power down the controller, serial number of controller is correct Trying to figure out why ? I am at oem level, Do i need a higher level ? Are they only programmed with a hand held? Has anyone been successful programing speed code 4 with the curtis software? Any help would be appreciated? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2022, 05:37 AM | #2 |
Gone Wild
Join Date: Dec 2011
Location: Hampton, GA
Posts: 467
|
Re: Programming Speed Code 4 with Curtis software- not working
https://www.buggiesgonewild.com/show...2&postcount=13
Check that thread out,... Also make sure the Controller S/N matches the S/N documented in the A,B,C codes you received in case someone transposed a digit when placing the request. |
Tags |
speed code 4 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speed code 4 not working | Electric Club Car | |||
Speed Code 4 Not Working | Electric golf carts | |||
Any luck programming the new RXV Curtis controller via Software | Electric EZGO | |||
02 DS speed code 4 not working? | Electric Club Car | |||
Precedent Speed code programming?? | Electric Club Car |