2011 president lift

Krazy-K · 10-24-2015, 01:34 PM

Any one ever added this to a 6 inch lifted cart for a slightly taller look? How did it work? http://www.buggiesunlimited.com/imag...ucts/95560.jpg I would like to bring the cart up a little higher. Thinking adding this in the front and adding a spacer in the lift block not sure how it will come out.

TahoeDawgZ71 · 10-25-2015, 08:05 AM

That lift block is designed to fit a factory suspension. Unless you have an existing spindle lift that re-uses the factory front spring mounting design, it's not going to fit. There is an 11" A-Arm lift kit available for your vehicle. Contact me if you're interested.

10-24-2015, 01:34 PM	#1
Krazy-K Not Yet Wild Join Date: May 2015 Location: Chesterfield MI Posts: 32	2011 president lift Any one ever added this to a 6 inch lifted cart for a slightly taller look? How did it work? http://www.buggiesunlimited.com/imag...ucts/95560.jpg I would like to bring the cart up a little higher. Thinking adding this in the front and adding a spacer in the lift block not sure how it will come out.

10-25-2015, 08:05 AM	#2
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: 2011 president lift That lift block is designed to fit a factory suspension. Unless you have an existing spindle lift that re-uses the factory front spring mounting design, it's not going to fit. There is an 11" A-Arm lift kit available for your vehicle. Contact me if you're interested.

Similar Threads
Thread	Forum
DS or President	Gas Club Car
Club Car President	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum