Just bought new everything, the EZ-GO still won't go!!!

roady89 · 04-22-2008, 09:51 PM

There are no instructions that I know of. I "think" there are 2-4 bolts on the diff....they go through the diff and thread into the motor. It should slip right off after getting those bolts out. You will have to wiggle it off....may be years of rust on the input shaft. Use some WD-40 if its needs a little help. Once you get it on the table you should see how to get it apart........worst case...send it to a local starter/alternator shop and have them put it back together.

MotoRider420 · 04-22-2008, 10:08 PM

THANK YOU THANK YOU THANK YOU!!!

Thats all for now, thanks!!!

awagner1978 · 10-09-2011, 11:23 PM

The test did work, tires did spin BUT, backwards?!? Any ideas?

scottyb · 10-10-2011, 01:39 AM

If the spins backwards it is good, will work in both directions when connected up properly in the cart.

rfquiggle · 06-24-2013, 10:42 PM

I think I have a running motor you can have if you still need one. I will have to check but if I have it You are welcome to it. I live in Pa. all I ask is you pay shipping. Need to know how many splines in motor where it bolts over differential.

04-22-2008, 09:51 PM	#11
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Just bought new everything, the EZ-GO still won't go!!! There are no instructions that I know of. I "think" there are 2-4 bolts on the diff....they go through the diff and thread into the motor. It should slip right off after getting those bolts out. You will have to wiggle it off....may be years of rust on the input shaft. Use some WD-40 if its needs a little help. Once you get it on the table you should see how to get it apart........worst case...send it to a local starter/alternator shop and have them put it back together.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

04-22-2008, 10:08 PM	#12
MotoRider420 Gone Wild Join Date: Jan 2008 Posts: 151	Re: Just bought new everything, the EZ-GO still won't go!!! THANK YOU THANK YOU THANK YOU!!! Thats all for now, thanks!!!
MotoRider420 Gone Wild Join Date: Jan 2008 Posts: 151

10-09-2011, 11:23 PM	#13
awagner1978 Not Yet Wild Join Date: Oct 2011 Posts: 2	Re: Just bought new everything, the EZ-GO still won't go!!! The test did work, tires did spin BUT, backwards?!? Any ideas?
awagner1978 Not Yet Wild Join Date: Oct 2011 Posts: 2

10-10-2011, 01:39 AM	#14
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Just bought new everything, the EZ-GO still won't go!!! If the spins backwards it is good, will work in both directions when connected up properly in the cart.

06-24-2013, 10:42 PM	#15
rfquiggle Not Yet Wild Join Date: Jun 2013 Posts: 48	Re: Just bought new everything, the EZ-GO still won't go!!! I think I have a running motor you can have if you still need one. I will have to check but if I have it You are welcome to it. I live in Pa. all I ask is you pay shipping. Need to know how many splines in motor where it bolts over differential.
rfquiggle Not Yet Wild Join Date: Jun 2013 Posts: 48

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
I just bought this for my Workhorse	Big Block Talk!