Truth in battery labeling

05-08-2013, 11:46 AM

very informative topic thanks

Oneunder · 05-08-2013, 03:21 PM

--------------
When you upgrade your controller, get a programmable one like a DCX. Then you can adjust the throttle up rate to keep from tripping the breaker in the BMS.

[/QUOTE]

I didn't know that was an option. My long term plan was to get 12 more volts and a BMS with the highest safe discharge rate. Then the other upgrades to go along with a 36v to 48 v conversion. I will probably still do that but need to absorb the battery expense first. SWMBO has been very tolerant but I think I will have to wait a bit before launching the rest of my evil plan.

The only instruction I have gotten regarding the capacitor was to wire it in parallel between battery discharge and controller. I will know more when I receive them (they are sending two to attach back to back if necessary) but I expect they will have a connection for both positive and negative.

05-08-2013, 11:46 AM	#21
crash test dummy Guest Posts: n/a	Re: Truth in battery labeling very informative topic thanks
crash test dummy Guest Posts: n/a

05-08-2013, 03:21 PM	#22
Oneunder Getting Wild Join Date: Feb 2013 Location: Kansas Posts: 108	Re: Truth in battery labeling -------------- When you upgrade your controller, get a programmable one like a DCX. Then you can adjust the throttle up rate to keep from tripping the breaker in the BMS. [/QUOTE] I didn't know that was an option. My long term plan was to get 12 more volts and a BMS with the highest safe discharge rate. Then the other upgrades to go along with a 36v to 48 v conversion. I will probably still do that but need to absorb the battery expense first. SWMBO has been very tolerant but I think I will have to wait a bit before launching the rest of my evil plan. The only instruction I have gotten regarding the capacitor was to wire it in parallel between battery discharge and controller. I will know more when I receive them (they are sending two to attach back to back if necessary) but I expect they will have a connection for both positive and negative.

Similar Threads
Thread	Forum
Labeling/overlay (where safety instructions are above cup holder) for switches/gauges	Design Center
Can I replace my 12v Battery with an AUTOMOTIVE Battery? (2005 Club Car Precedent)	Electric Club Car
scam or some truth to this theory?	Electric EZGO
Need Help!! Terminal labeling on 1991 club car motor	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum