|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-29-2013, 10:36 AM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,357
|
Re: Replaced Almost All Critical Components, No Forward Motion
What controller and what size tires are you running on this cart?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2013, 10:47 AM | #12 |
Not Yet Wild
Join Date: May 2013
Posts: 8
|
Re: Replaced Almost All Critical Components, No Forward Motion
This is a stock Curtis 300 amp and stock tires cart. No lifting, no off roading.
I actually use it just for golfing, or I will until I can get this fixed. Both controllers I have now are remanufactured. One does not go in forward and the other does but very sluggishly.............reverse is sluggish too......... |
05-29-2013, 11:51 AM | #13 |
Not Yet Wild
Join Date: May 2013
Posts: 8
|
Re: Replaced Almost All Critical Components, No Forward Motion
Continued trouble shooting and according to Step 35 on Pg F14, it says if you get reference voltage (38.5v) as I did on the green wire in the pedal box MS to replace the green wire to pin 1 on terminal J4 on the controller.
Am I thinking this to be a bit of stretch for one bad wire in that assembly? |
Tags |
controller issues, no forward |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Jerking Motion Forward | Electric golf carts | |||
Uh oh! No motion! | Electric EZGO | |||
Replaced micro-switch now full speed reverse & forward | Electric Club Car | |||
Charges?? in motion. | Electric EZGO | |||
can the two copper bolts on the forward reverse switch be replaced | Electric EZGO |