|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-31-2013, 12:59 PM | #1 |
Not Yet Wild
Join Date: Apr 2013
Posts: 5
|
Installing 12V batteries in a 36v EZ Go
I just received three 12 volt batteries. I need some help in installing them properly. I have two wires coming out of the motor (?) area on the passenger side of the cart and two wires coming out of the charger input on the drivers side of the cart. Not sure which wire goes to which positive/negative battery. Also, I have the internal wires between batteries going from negative battery one to positive battery two. Is this correct ? I have tried a variety of hookups... nothing is working. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-31-2013, 02:17 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Installing 12V batteries in a 36v EZ Go
Welcome to BGW
3 12v batteries is not what goes in your cart, can you tell us what cart you have? year and drive system |
06-01-2013, 09:51 AM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Installing 12V batteries in a 36v EZ Go
3 12v batteries will give you a very short run time.
we need to now what year/drive system your cart is. the wires on the charger receptacle goes like this. white is power and black is ground. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Charger will not kick on after installing new batteries | Electric EZGO | |||
Installing 8:1 gears | Gas EZGO | |||
charger reads, check batteries, and limit use with new batteries! | Electric Club Car | |||
Installing a DCX 400 | Electric EZGO | |||
installing radio in 96 TXT | Electric EZGO |