|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-08-2015, 08:45 AM
|
#11 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
I switch the wires and it goes forward when I switch it to reverse on lever and reverse does nothing still with them flipped
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-08-2015, 08:49 AM
|
#12 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
With wires flipped Will still go forward when putting lever into reverse But not go into reverse when putting lever in forward
|
|
|
|
|
05-08-2015, 08:51 AM
|
#13 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
Solenoid is clicking for everytime I hit pedal both ways . And beep goes off when in reverse like normally should
|
|
|
|
|
05-08-2015, 08:57 AM
|
#14 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: No reverse please help
Try swapping the orange and purple wire positions at both ends.
|
|
|
|
05-08-2015, 08:58 AM
|
#15 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
Anyway to check for reverse in it
|
|
|
|
|
05-08-2015, 09:02 AM
|
#16 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse please help
Have You changed any wires recently?
Please follow the Blue and the Orange wires that are connected to the swivel posts of the FNR, they should go to the motor S1 and S2 terminals. Use the diagram I posted, the only way the FNR can behave the way You describe is if it is wired wrong. |
|
|
|
|
05-08-2015, 09:07 AM
|
#17 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
Swapped on motor and doing same thing was doing when swapped at switch
|
|
|
|
|
05-08-2015, 09:12 AM
|
#18 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
Sergio u are the f-n man .. Turns out the guy changed the colors of the wires to match the oem colors even when traced back to solenoid and controller but the color was on wrong terminal after u said s1 s2. WORD
|
|
|
|
|
05-08-2015, 09:12 AM
|
#19 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse please help
Swapping at the motor would not make any difference.
Are You sure that the wires from S1 and S2 go to the 2 swivel posts in the FNR switch? Edit: Just read it your last post. Great news  |
|
|
|
|
05-08-2015, 09:15 AM
|
#20 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 35
|
Re: No reverse please help
U have a shop or store . Cause I will buy from u in future
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| No reverse. HD forward reverse switch needed? | Electric Club Car | |||
| Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
| Foward in reverse and reverse in forward | Electric Club Car | |||
| Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Linear Mode
