|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-30-2015, 03:29 PM | #1 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Looking for a full belly pan for a CC DS
Have a friend with a CC DS looking for a full skid plate or belly pan for his cart. Did a search here and didn't much for a DS. I asked him what year it is and got a blank stare but the clutch is on the passenger side..
Ideas ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-30-2015, 06:10 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Looking for a full belly pan for a CC DS
I'm lost what's that?
All gas clutches are on pass side |
07-31-2015, 10:31 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Looking for a full belly pan for a CC DS
Something I did not know about the clutches.. Thanks.
Basically looking for a skid plate to protect the engine and under carriage.. |
07-31-2015, 01:21 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Looking for a full belly pan for a CC DS
So your saying the engine cradle?
What the engine mounts to & rearend mounts to? There's a difference in years if I recall also as my 90 is diff from my 99 |
08-01-2015, 06:41 AM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Looking for a full belly pan for a CC DS
I haven't seen the cart so I will have to get him to get me a year so I will be more informed
|
08-01-2015, 10:20 AM | #6 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Looking for a full belly pan for a CC DS
Not a cradle. A full length skid plate.
Make one out of an old street sign. I found a "WRONG WAY" sign at a yardsale for $5. Yeah, if you will be able to read it, my cart will be the WRONG WAY, . That could have been proven at CAW last May since I did put the cart on its side. D@mn beers. I just plan to cut it to size and cut slits in it to use hose clamps and attach to places on the swingarm. |
08-01-2015, 11:27 AM | #7 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Looking for a full belly pan for a CC DS
I thought the engine was already protected by the cradle.
Maybe i am wrong. I'd have to look again. |
08-01-2015, 10:44 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Looking for a full belly pan for a CC DS
He is trying to protect more area just to keep sticks and trash out of the wiring and clutches. Never thought about a sign boke. I would think just some diamond plate would work too.
|
08-02-2015, 08:18 AM | #9 |
Younger Than Dirt
Join Date: Aug 2007
Location: North Myrtle Beach SC
Posts: 2,047
|
Re: Looking for a full belly pan for a CC DS
I just plan to cut it to size and cut slits in it to use hose clamps and attach to places on the swingarm.[/QUOTE]
That's what I did, it's beat to hell but it woks |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G1 Only Runs with full choke and full Throttle | Gas Yamaha | |||
Belly pan (skid plate) | Gas EZGO | |||
Full speed forward, full speed reverse | Electric EZGO | |||
Removing the belly Pan | Gas Club Car | |||
full forward to full reverse... a blown fuse? | Electric golf carts |