|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-05-2015, 11:56 AM | #1 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Not working support needed big time
I was given alsome help to get it going but
Kids were driving around campground and a wire stared to burn told caught on fire Now not getting any power to motor Solenoid is clicking getting power Fuse is good Changed cable but not working All batteries good |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-05-2015, 01:58 PM | #2 |
Guest
Posts: n/a
|
Re: Not working support needed big time
where did it burn at ?
|
09-05-2015, 02:03 PM | #3 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Not working support needed big time
At the motor A2
Yamaha 36v G9 |
09-05-2015, 03:35 PM | #4 |
Guest
Posts: n/a
|
Re: Not working support needed big time
did you use 2 wrenches when changing cable ?
|
09-05-2015, 03:53 PM | #5 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Not working support needed big time
Large post, Positive side of solenoid shows 19.9v the small post show 38.9v
Hit peddle large post goto 0 Then small post show 38.9 |
09-05-2015, 06:34 PM | #6 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Not working support needed big time
It was working great
Them motor headed up and cables lit while driving |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
First time G1 lift advice needed | Lifted Golf Carts | |||
Battery Charger Not Working - Cart Not Working | Electric EZGO | |||
First time cart owner and after 2 months, it stopped working! | Electric EZGO |