'87 EZ-GO 2 cycle clutch removal

[ruredy]

Ask the people at comet, they should know. looks like you could use a harmonic balancer puller on it to me

[DEWDIGGLER]

popatop, in the norhtwest corner of iowa

[scubajoe]

Originally Posted by ruredy

Ask the people at comet, they should know. looks like you could use a harmonic balancer puller on it to me

I was thinking that, but was afraid to put too much torque on that piece - wasn't sure if it could handle it. I'll report back.

[popatop]

Originally Posted by DEWDIGGLER

popatop, in the norhtwest corner of iowa

Burrrrrr your up their where they bring the brass monkeys in

[divot61]

ok scuba, thats an old clutch, do you have a harmonic balancer puller? you could put a 1/2" or bigger rod in there to take up the inside length then use the 3 outside bolts on the puller and run the center bolt in and it should pop off, hope you have some luck on that. squirt some pb blaster or something like that and let it sit overnite with pressure on it, if it dont want to come off right away

[scubajoe]

Thanks, I'll do that. I'll probably go to the hardware store and pick up some bolts, 'cause my puller doesn't have matching bolts to the 3 that are there, and I don't want to bust them.

[dock98]

Originally Posted by popatop

Hi Dew, Just wondering what part of Iowa is Okoboji in, Lived in Ottumwa Iowa for 8 years, Have a good one.

its right next to Spirit Lake,Arnolds Park etc.in the northeastern most part of IA.my wife is from Spirit Lake.

[DEWDIGGLER]

your close dock, the okoboji's are in northwest iowa.

i live in milford, which is 1 1/2 miles south of west okoboji.
the okoboji's are a vacation/tourist area in the summer with all the lakes around

[DEWDIGGLER]

and your right pop, it gets very cold in the winter. (specially this winter)
thank god spring is here !!!!!

[popatop]

Morels should be popping up before long,